SWITCHABLE VHF/UHF DUAL BANDER

The IC-80AD provides VHF/UHF dual band capabilities (one band at a time) via a simple band switching system.

WIDEBAND RECEIVER

The IC-80AD has a wideband receiver as a standard feature and covers 0.495-999.99MHz. *Listen to aviation, marine, weather channels and other utility communications*. 
*Receiver range depending on versions. See specifications page.

CS-80/880 FREE DOWNLOAD CLONING SOFTWARE

The CS-80/880 free download cloning software is available from the Icom web site. Used with this software, various settings can be made from a PC and the memory channels and other settings can be shared between IC-80AD and its matching mobile unit, the ID-880H. Please download fromhttp://www.icom.co.jp/world/support/download/firm/.
*Either OPC-1529R, OPC-478 or OPC-478UC optional cable is required.

1052 MEMORY CHANNELS

The IC-80AD has a total of 1052 memory channels (including 1000 regular channels, 50 scan edges and 2 call channels) with 26 memory banks. All memory channels and the program scan can be named with 8-character channel comments. Also each memory bank can be named with up to 6-character bank name comment.

MULTIPLE SCAN FUNCTION

The IC-80AD supports various scan types for maximum reception and ease of use

  • Full scan
  • Selected band scan
  • Programmed scan
  • Memory scan
  • Memory mode scan
  • All bank scan
  • Selected bank scan
  • Bank link scan (DMS)
  • Program scan link
  • Skip scan
  • Priority scan
  • Tone scan
  • Access repeater scan

BUILT-IN CTCSS/DTCS ENCODER AND DECODER

Built-in CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750Hz tone is also available.

OPTIONAL GPS SPEAKER-MICROPHONE, HM-189GPS

When used with the new GPS speaker-microphone, HM-189GPS, the IC-80AD shows your position data on the display and offers a position reporting function in DV mode. The IC-80AD shows the direction to a memory position or to a received D-STAR station.

5 WATTS (TYPICAL) OUTPUT

The IC-80AD provides 5W (typical) output power both in VHF/UHF bands. The supplied BP-217 provides up to 6 hours* of operating time. When you don’t need full power operation, you can reduce output power to 2.5/0.5/0.1W (typ.) for saving battery consumption 
*Tx high: Rx: Stand-by duty ratio= 1 min.: 1min.: 8 min. Power save on.

EXTERNAL DC POWER JACK

An external DC power jack allows for operation with an external DC power supply (10-16VA DC). When used with the DC power cable simultaneously operation during charging is possible.

KEYPAD NAVIGATION

The 4-direction cursor buttons on the keypad give you quick and intuitive access to many settings.

ADDITIONAL FEATURES

  • Monitor function to listen to a weak signal
  • 14 Variable tuning steps
  • Auto repeater function automatically turns on/off duplex operation and tone encoder
  • Weather channel receive with weather alert
  • 16 DTMF memory channels (24 digits)
  • Key lock function
  • 4 steps RF power selection (5W, 2.5W, 0.5W, 0.1W)
  • Drip-resistant construction, equivalent to IPX4
  • Auto power save, power off and power on
  • 10dB (approx.) built-in attenuator
DSTAR Schematic

Leave a Reply

Your email address will not be published. Required fields are marked *


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/mediaisl/public_html/squad99.org/my/wp-includes/functions.php on line 5581